Tile attachment
Tile is fastened with nails, screws, clips or adhesive in a pattern set by the tile profile.
Tile Roofing
Tile Roof Installation Springfield, NJ
A roofer in Springfield can install a clay or concrete tile roof, starting with a check that the framing can carry the weight and finishing with the flashing, ridge and eave details that keep it dry. One call to (908) 562-6898 reaches a nearby tile installer.
Before any tile goes up, the question is whether the house can hold it. A tile roof weighs several times as much as asphalt shingles, and a home built for shingles may need an engineer to check the rafters or trusses before switching. On new construction, the framing is sized for tile from the plans onward.
The tile choice comes next. Clay holds its color through the whole tile and lasts for generations, and concrete tile is heavier, more absorbent and offers a wide range of shapes and finishes. The profile can be flat, low curve or high curve, and each handles water and wind a little differently.
A tile roof is only as good as the underlayment and flashing hidden beneath it. Slope matters too: tile generally needs at least 2.5 in 12, and slopes under 4 in 12 need a double layer of underlayment. Choosing a long lasting underlayment now is what keeps the roof from needing a relay in twenty years.
Tile Roof Installation is often paired with tile roof replacement and roof installation, depending on the cause.
Dealing with this in Springfield, NJ right now? Call (908) 562-6898 to reach a nearby roofing contractor.
Call nowThe process
How tile roof installation works
Each layer of a tile roof has a job, and the order matters.
Check the structure
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. Tile is ordered with extra for cuts, hips and future repairs.
Dry in the roof
The deck gets edge metal and underlayment, from heavy felt to synthetic or self-adhered membrane, lapped so water runs over each seam. This is the layer that handles every drop of water that slips past the tile.
Install battens
Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. That air space under the tile helps the roof shed heat and dry out.
Install flashing
Wide valley metal, pan flashing at walls and soft metal flashing at pipes are installed so water is carried over the underlayment, not into it. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Lay the tile
Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Small cut pieces at hips and valleys get extra attention.
Cap the ridge
Ridge and hip caps are set on a raised ridge board, either in mortar or with a dry ridge system and a vented closure that lets attic air out. The roof is cleaned, broken pieces are replaced and spares are left with the owner.
What is included
A complete tile roof system
Ridge finish
Bird stops close the eave and caps seal the ridge so birds and wind-driven rain stay out.
Structural review
The framing is checked for the weight of tile and reinforced where needed.
Valley metal
Valleys, walls, chimneys and pipes get flashing sized for tile which is where tile roofs usually leak.
Underlayment system
Doubled or self-adhered underlayment goes down where needed lapped to shed water to the eaves.
Related service
Barrel Tile Roof Installation Springfield, NJ
A barrel tile roof uses two pieces per course, a pan tile that channels water and a curved cover tile that caps each seam. The tapered shape lets each tile nest into the one below, creating the deep rolling texture barrel roofs are known for. That depth means the open ends at eaves and ridges have to be closed with bird stops, mortar or formed closures.
Barrel tile roof installation in Springfield calls for extra attention to fastening, since cover tiles sit high and catch wind. Straight, evenly spaced rows take chalk lines and patience on the deck.
Related service
Spanish Tile Roof Installation Springfield, NJ
Spanish tile usually means the S-shaped profile that combines a pan and a cover in a single piece, giving the look of barrel tile with half the pieces. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in Springfield follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. If you choose a blend, the roofer mixes tile from several pallets at once to spread the color evenly.
Local help
Tile Roof Installation Near Me
In Springfield, new tile roofs go onto homes of every age, from fresh builds to older houses moving away from shingles. For older homes in Springfield and nearby towns like Vauxhall, Kenilworth, Union and Short Hills, the framing check is the step that decides whether tile is practical, and storms that bring strong wind make fastening choices as important as the tile itself.
Need tile roof installation around Springfield? Call (908) 562-6898 for a Springfield roofer who serves the towns around it too.
How the weather here affects roofs around Springfield
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Springfield is busiest after a hard winter and before the next one.
Why call
Why fix it now
Drier ceilings
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local knowledge
Roofers in Springfield know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
Should I choose clay or concrete roof tile?
Each has real strengths. Clay keeps its color through the tile, is lighter than most concrete tile and can last for generations. Concrete is sturdy and widely available, though it absorbs more moisture and its surface weathers with age.
How heavy is a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Some lighter weight tile products are made for homes with less structural capacity.
What underlayment goes under a tile roof?
Options include heavy felt, synthetic sheets and peel-and-stick membranes, often doubled on lower slopes. Because the underlayment is what fails first on most tile roofs, it is not the place to cut corners. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
Can tile go over old shingles?
A tile roof needs a bare deck, so existing shingles or other roofing are removed. Removing the old roof also takes weight off the framing, which matters with a material this heavy.
How long does tile roof installation take?
Tile goes on slower than shingles, so most homes take one to several weeks. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.
More questions? Call (908) 562-6898
Often needed together
Tile Roof Replacement
Tile roof replacement that strips the roof to the deck, renews the underlayment and flashing and puts sound tile back on, so the layers under the tile last as long as the tile.
Learn moreRoof Installation
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, so it sheds water at every edge and seam.
Learn moreTile Roof Inspection
A close look at the tile, underlayment, flashing, valleys and attic of a clay or concrete tile roof, without breaking tile in the process.
Learn moreRoof Ventilation
Fixing hot, damp or poorly vented attics with the right mix of intake and exhaust, without mixing vent types that work against each other.
Learn more
Looking for something else?
See all roofing servicesTalk to a Springfield roofer about tile roof installation
Call (908) 562-6898 to talk to a roofer serving Springfield, NJ.